Description:
*xinchai 490 EURO III engine*joystick.quickhitch
*with torque converter.
*four-wheel drive, timer,
*preheater device
CS910 wheel loaders with CEapproved.joystick.quickhitch.
*xinchai 490 EURO III engine
*joystick.quickhitch
*with torque converter.
*four-wheel drive, timer,
*preheater device
THE TECHNICAL PARAMETERS OF HY910CE CERTIFICATE MINI WHEEL LOADER | |||||
Bucket Capacity(m3) | 0.4m³ | Operating Weight(kg) | 2690kg | ||
Bucket width(mm) | 1430 | Brake mode | Four-wheel hydraulicspead-shoed brake | ||
Rated Load (kg) | 1000kg | Drivingmode | Four-wheeldrive | ||
Max. Breakout Force(KN) | 35 | Overall Dimensions(mm) | L:4450xW:1430xH:2370(2000) | ||
Forward Speed 1st(km/h) | 0-12 | Full Bucket Lifting Time(s) | 4.5s | ||
Forward Speed 2nd(km/h) | 0-24 | Total Hydraulic Cycle Time(s) | 9s | ||
Reverse Speed (km/h) | 0-24 | Tread Width (mm) | 220 | ||
Max. Dumping Height(mm) | 2420 | Wheel base (mm) | 1710 | ||
Max. Dumping Reach(mm) | 850 | Min. Clearance Over Ground(mm) | 230 | ||
Min. Turning Radius(mm) | 3890 | MAX.tilt angel(°) | 30 | ||
DieselEngine | Brand | Xinchai 490 Euro IIIengine | SteeringSystem | Working Pressure (MPa) | 10MPa |
Type | In-linearrangement, water cooled,four-cycle diesel engine | Max. Steering Angle(°) | 30 | ||
Rated Output (kw) | 36.8kw | Working HydraulicSystem | Pressure Of Tire (MPa) | 2.5-3.5 | |
Rated Speed (rpm) | 2200rpm | Working Pump Type | Gear pump | ||
Engine starting mode | Electric | Working Pressure (MPa) | 16MPa | ||
Transmission | Type | Fixed-spindlePower shift with converter | Transaxle &Tire | Rear Axle Oscillation | Center oscillation |
Rated Input Speed(rpm) | 2200 | Oscillating Angle Of Rear Axle(°) | 13 |
1.Using directinjection diesel engine as power, with easy startup and low oilconsumption
2.Using specialdrive axle, with strong ability to overcome obstacle
3.Using the centralarticulated frame and load-sensing hydraulic steering gear, withsmall turning radius and flexible turning, which applies to theoperation in narrow space
4.This machine useshydraulic operation, with simple structure, convenient operation,good performance and reliable quality
5.Widely applying tothe construction of agricultural engineering and small and mediumbuilding such as road, coal mine, brickyard, urban construction,kiln factory, stone material factory, prefabricated cement partsfactory, etc.
5.Hydraulicmechanical transmission, can make full use of enginepower
6.Using four -wheel-drive, low wide-based off-road tires
7.A single pipelinehydraulic brake system up for wheel brake shoe
Welcometo Contact me and visit my factory.
compact wheel loader CS910 with Euro III engine